All MIBs › BLADETYPE4-NETWORK-MIB › agApplyConfig
agApplyConfig
Module: BLADETYPE4-NETWORK-MIB
OID (symbolic): BLADETYPE4-NETWORK-MIB::agApplyConfig
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable.
What is agApplyConfig?
Controls and reports the state of the configuration apply operation; reading it shows the current state (idle, complete, etc.) and writing the value apply(1) commits all pending configuration changes to the running device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2 snmpwalk -v2c -c public <target> BLADETYPE4-NETWORK-MIB::agApplyConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2.1 snmpget -v2c -c public <target> BLADETYPE4-NETWORK-MIB::agApplyConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2.1 i <value>
Start monitoring HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE4-NETWORK-MIB::agApplyConfig OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.4 | hpSwitchModuleBladetype4 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2 | hpSwitchBladeType4_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1 | agent | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1 | agentConfig | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8 | agApply | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2 | agApplyConfig | BLADETYPE4-NETWORK-MIB |