BLADETYPE4-NETWORK-MIB :: aclNewCfgEthernetTypeName

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADETYPE4-NETWORK-MIBaclNewCfgEthernetTypeName

aclNewCfgEthernetTypeName

Module: BLADETYPE4-NETWORK-MIB

OID (symbolic): BLADETYPE4-NETWORK-MIB::aclNewCfgEthernetTypeName

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered. If this object is set to a value other than other(7), the value of the aclNewCfgEthernetTypeValue object is automatically set, as follows:

aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue none(0) 0 arp(1) 2054 (0x0806) ipv4(2) 2048 (0x0800) ipv6(3) 34525 (0x86dd) mpls(4) 34887 (0x8847) rarp(5) 32821 (0x8035) any(6) 65535 (0xffff)

What is aclNewCfgEthernetTypeName?

Specifies the named Ethernet type (e.g., IP, ARP, IPX) to be filtered by this ACL entry; if set to 'other', the actual numeric type is taken from aclNewCfgEthernetTypeValue. This allows the ACL to target specific layer-2 protocol types for filtering.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13
snmpwalk -v2c -c public <target> BLADETYPE4-NETWORK-MIB::aclNewCfgEthernetTypeName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13.1
snmpget -v2c -c public <target> BLADETYPE4-NETWORK-MIB::aclNewCfgEthernetTypeName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13.1 i <value>

Start monitoring HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE4-NETWORK-MIB::aclNewCfgEthernetTypeName OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.7netElementHP-ICF
1.3.6.1.4.1.11.2.3.7.11hpEtherSwitchHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33hpSwitchProliantHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.4hpSwitchModuleBladetype4HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.4.2hpSwitchBladeType4_MgmtHP-SWITCH-PL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9aclBLADETYPE4-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1acConfigBLADETYPE4-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1acListBLADETYPE4-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2aclNewCfgTableBLADETYPE4-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1aclNewCfgEntryBLADETYPE4-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13aclNewCfgEthernetTypeNameBLADETYPE4-NETWORK-MIB