All MIBs › BLADETYPE2-QOS-MIB › aclNewCfgAclRemarkOutProfUpdateDscp
aclNewCfgAclRemarkOutProfUpdateDscp
Module: BLADETYPE2-QOS-MIB
OID (symbolic): BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkOutProfUpdateDscp
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Re-Mark out profile dscp for acl re-mark of a specified port.
What is aclNewCfgAclRemarkOutProfUpdateDscp?
Configures the DSCP value to apply when re-marking out-of-profile (non-conforming) traffic on a specified port under an ACL remark rule. This enables the switch to downgrade or reclassify DSCP markings for traffic that exceeds the defined profile.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.6 snmpwalk -v2c -c public <target> BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkOutProfUpdateDscp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.6.1 snmpget -v2c -c public <target> BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkOutProfUpdateDscp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.6.1 i <value>
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkOutProfUpdateDscp OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.1 | hpSwitchModuleBladetype2 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2 | hpSwitchBladeType2_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8 | qos | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1 | qosConfigs | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2 | aclCfg | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6 | aclNewCfgPortAclRemarkTable | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1 | aclNewCfgPortAclRemarkTableEntry | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.6 | aclNewCfgAclRemarkOutProfUpdateDscp | BLADETYPE2-QOS-MIB |