All MIBs › BLADETYPE2-QOS-MIB › aclNewCfgAclRemarkAssignAcl
aclNewCfgAclRemarkAssignAcl
Module: BLADETYPE2-QOS-MIB
OID (symbolic): BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkAssignAcl
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Assign acl re-mark for specified port to acl.
What is aclNewCfgAclRemarkAssignAcl?
Assigns a specific ACL to the re-mark configuration for a given port, linking the remark rules to that ACL's traffic match criteria. Writing to this object attaches the designated ACL so its matched traffic will be subject to the configured re-marking.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.7 snmpwalk -v2c -c public <target> BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkAssignAcl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.7.1 snmpget -v2c -c public <target> BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkAssignAcl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.7.1 i <value>
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-QOS-MIB::aclNewCfgAclRemarkAssignAcl OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.1 | hpSwitchModuleBladetype2 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2 | hpSwitchBladeType2_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8 | qos | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1 | qosConfigs | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2 | aclCfg | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6 | aclNewCfgPortAclRemarkTable | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1 | aclNewCfgPortAclRemarkTableEntry | BLADETYPE2-QOS-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.8.1.2.6.1.7 | aclNewCfgAclRemarkAssignAcl | BLADETYPE2-QOS-MIB |