All MIBs › BLADETYPE2-PHYSICAL-MIB › ufdNewCfgLtMPorts

ufdNewCfgLtMPorts

OID (symbolic): BLADETYPE2-PHYSICAL-MIB::ufdNewCfgLtMPorts

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The LtM port list. The ports are presented in bitmap format.
in receiving order:

     OCTET 1  OCTET 2  .....
    xxxxxxxx xxxxxxxx .....
    ||    || |_ port 8
    ||    ||
    ||    ||___ port 7
    ||    |____ port 6
    ||      .    .   .
    ||_________ port 1
    |__________ reserved

where x : 1 - The represented port belongs to LtM
   0 - The represented port does not belong to LtM

What is ufdNewCfgLtMPorts?

Configures the ports to be assigned to the UFD Link-to-Monitor (LtM) group as a bitmap; these uplink ports will be watched for failures once the configuration is applied. Changes are pending until the next configuration commit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.4
snmpwalk -v2c -c public <target> BLADETYPE2-PHYSICAL-MIB::ufdNewCfgLtMPorts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.4.1
snmpget -v2c -c public <target> BLADETYPE2-PHYSICAL-MIB::ufdNewCfgLtMPorts.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.4.1 s <value>

Start monitoring Layer 2 managed switches/blade modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-PHYSICAL-MIB::ufdNewCfgLtMPorts OID value, configure state conditions and alerts, and monitor any Layer 2 managed switches/blade modules from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.3	hpsystem	CLJ8500-MIB
1.3.6.1.4.1.11.2.3.7	netElement	HP-ICF
1.3.6.1.4.1.11.2.3.7.11	hpEtherSwitch	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33	hpSwitchProliant	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.1	hpSwitchModuleBladetype2	HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2	hpSwitchBladeType2_Mgmt	HP-SWITCH-PL-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2	layer2	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1	layer2Configs	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9	ufd	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1	ufdGeneralCfg	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.4	ufdNewCfgLtMPorts	BLADETYPE2-PHYSICAL-MIB

BLADETYPE2-PHYSICAL-MIB :: ufdNewCfgLtMPorts

ufdNewCfgLtMPorts

Module

This MIB depends on