All MIBs › BLADETYPE2-PHYSICAL-MIB › stgCurCfgVlanBmap

stgCurCfgVlanBmap

OID (symbolic): BLADETYPE2-PHYSICAL-MIB::stgCurCfgVlanBmap

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The vlans applied to the spanning tree group.  The vlans are 
presented in bitmap format. This string displays vlan number
from 1 to 4095.

in receiving order:

    OCTET 1  OCTET 2  .....
    xxxxxxxx xxxxxxxx ..... 
    ||    || |_ vlan 9
    ||    ||  
    ||    ||___ vlan 8
    ||    |____ vlan 7
    ||      .    .   .
    ||_________ vlan 2
    |__________ vlan 1 (as index to stgCurCfgTable)

where x : 1 - The represented vlan applied to the spanning tree. 
          0 - The represented vlan not applied to the spanning tree

What is stgCurCfgVlanBmap?

Reports a bitmask showing all VLANs (numbered 1 through 4095) currently assigned to this Spanning Tree Group in a single combined bitmap. Each bit position corresponds to one VLAN number.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.10
snmpwalk -v2c -c public <target> BLADETYPE2-PHYSICAL-MIB::stgCurCfgVlanBmap

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.10.1
snmpget -v2c -c public <target> BLADETYPE2-PHYSICAL-MIB::stgCurCfgVlanBmap.1

Start monitoring Layer 2 managed switches/blade modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-PHYSICAL-MIB::stgCurCfgVlanBmap OID value, configure state conditions and alerts, and monitor any Layer 2 managed switches/blade modules from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.3	hpsystem	CLJ8500-MIB
1.3.6.1.4.1.11.2.3.7	netElement	HP-ICF
1.3.6.1.4.1.11.2.3.7.11	hpEtherSwitch	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33	hpSwitchProliant	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.1	hpSwitchModuleBladetype2	HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2	hpSwitchBladeType2_Mgmt	HP-SWITCH-PL-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2	layer2	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1	layer2Configs	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3	stgCfg	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1	stgCurCfgTable	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1	stgCurCfgTableEntry	BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.10	stgCurCfgVlanBmap	BLADETYPE2-PHYSICAL-MIB

BLADETYPE2-PHYSICAL-MIB :: stgCurCfgVlanBmap

stgCurCfgVlanBmap

Module

This MIB depends on