BLADETYPE2-PHYSICAL-MIB :: l2ThashCurCfgDipState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADETYPE2-PHYSICAL-MIBl2ThashCurCfgDipState

l2ThashCurCfgDipState

Module: BLADETYPE2-PHYSICAL-MIB

OID (symbolic): BLADETYPE2-PHYSICAL-MIB::l2ThashCurCfgDipState

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Enable or disable dip hash.

What is l2ThashCurCfgDipState?

This read-only object reports whether destination IP address (DIP) hashing is currently enabled or disabled for Layer 2 trunk load balancing. It shows whether the active configuration uses the destination IP to determine which aggregated link a packet is sent over.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.7
snmpwalk -v2c -c public <target> BLADETYPE2-PHYSICAL-MIB::l2ThashCurCfgDipState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.7.1
snmpget -v2c -c public <target> BLADETYPE2-PHYSICAL-MIB::l2ThashCurCfgDipState.1

Start monitoring Layer 2 managed switches/blade modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-PHYSICAL-MIB::l2ThashCurCfgDipState OID value, configure state conditions and alerts, and monitor any Layer 2 managed switches/blade modules from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.7netElementHP-ICF
1.3.6.1.4.1.11.2.3.7.11hpEtherSwitchHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33hpSwitchProliantHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.1hpSwitchModuleBladetype2HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2hpSwitchBladeType2_MgmtHP-SWITCH-PL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2layer2BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1layer2ConfigsBLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7thashBLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1thashL2BLADETYPE2-PHYSICAL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.7l2ThashCurCfgDipStateBLADETYPE2-PHYSICAL-MIB