All MIBs › BIANCA-BRICK-X25-MIB › x25MprEncapsulation
x25MprEncapsulation
Module: BIANCA-BRICK-X25-MIB
OID (symbolic): BIANCA-BRICK-X25-MIB::x25MprEncapsulation
OID (numeric): 1.3.6.1.4.1.272.4.6.7.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the encapsulation method to be used.
If this object is set to ip_rfc877, the RFC877 compatible encapsulation is selected. The relating interface is only capabable of transferring IP datagrams. All other protocols are not supported. Virtual channels are established only with the CUD field set to CC.
If this object is set to ip, the relating interface is also only capable of forwarding IP datagrams. However, the virtual channels are setup with the CUD field set to 80 00 00 00 08 00.
The encapsulation ipx allows only forwarding of IPX datagrams. VCs are established using a CUD field of 80 00 00 00 81 37.
If this object is set to mpr, the corresponding corresponding interface is capable of IP, IPX and BRIDGING. The different protocols are multiplexed over the same VC. The CUD field is set to 00.
What is x25MprEncapsulation?
Selects the encapsulation method for this multiprotocol-over-X.25 interface (per RFC 1356): ip-rfc877 and ip both carry only IP traffic with different CUD field values, ipx carries only IPX traffic, and mpr multiplexes IP, IPX, and bridging together over the same virtual circuit. Setting it to delete removes the row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.6.7.1.3 snmpwalk -v2c -c public <target> BIANCA-BRICK-X25-MIB::x25MprEncapsulation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.6.7.1.3.1 snmpget -v2c -c public <target> BIANCA-BRICK-X25-MIB::x25MprEncapsulation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.6.7.1.3.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-X25-MIB::x25MprEncapsulation OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.6 | x25 | BIANCA-BRICK-X25-MIB |
| 1.3.6.1.4.1.272.4.6.7 | x25MprTable | BIANCA-BRICK-X25-MIB |
| 1.3.6.1.4.1.272.4.6.7.1 | x25MprEntry | BIANCA-BRICK-X25-MIB |
| 1.3.6.1.4.1.272.4.6.7.1.3 | x25MprEncapsulation | BIANCA-BRICK-X25-MIB |