All MIBs › BIANCA-BRICK-SERIAL-MIB › serialIfLeads
serialIfLeads
Module: BIANCA-BRICK-SERIAL-MIB
OID (symbolic): BIANCA-BRICK-SERIAL-MIB::serialIfLeads
OID (numeric): 1.3.6.1.4.1.272.4.25.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of IfLeads has influence on the state of the physical layer (L1State). When configured as IfLeads=enabled, the state of the physical layer depends on the signals of the control interface pins Indication/Control on X.21 or RTS/CTS on the other protocols. When configured as IfLeads=disabled, the state of the physical layer stays always up. enabled(1) interface pins accepted. disabled(2) ignore interface pins.
What is serialIfLeads?
Controls whether the physical layer's up/down state (serialIfL1State) follows the interface's control signal pins (Indication/Control on X.21, or RTS/CTS on other standards) when enabled(1), or always stays up regardless of those pins when disabled(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.25.1.1.4 snmpwalk -v2c -c public <target> BIANCA-BRICK-SERIAL-MIB::serialIfLeads
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.25.1.1.4.1 snmpget -v2c -c public <target> BIANCA-BRICK-SERIAL-MIB::serialIfLeads.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.25.1.1.4.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-SERIAL-MIB::serialIfLeads OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.25 | serial | BIANCA-BRICK-SERIAL-MIB |
| 1.3.6.1.4.1.272.4.25.1 | serialIfTable | BIANCA-BRICK-SERIAL-MIB |
| 1.3.6.1.4.1.272.4.25.1.1 | serialIfEntry | BIANCA-BRICK-SERIAL-MIB |
| 1.3.6.1.4.1.272.4.25.1.1.4 | serialIfLeads | BIANCA-BRICK-SERIAL-MIB |