All MIBs › BIANCA-BRICK-SERIAL-MIB › serialIfClock
serialIfClock
Module: BIANCA-BRICK-SERIAL-MIB
OID (symbolic): BIANCA-BRICK-SERIAL-MIB::serialIfClock
OID (numeric): 1.3.6.1.4.1.272.4.25.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The physical layer (layer 1) clocking mode. When configured as AUTO the clock provided depends what is configured on connector. If connector is configured as DTE clock must provided from external, if the connector is configured as DCE clock is generated and is provided at the output pins. It is possible to configure the clock independed from connector type. EXTERNAL clock means the clock must provided by the external device and INTERNAL clock means the clock is generated by the brick and is provided on the output pins. X.21 on clock line is provided. V.35/V.36 two clock lines are provided. auto(1) connector = DTE = extern, DCE = intern extern(2) clock pins operate as input. intern(3) clock pins operate as output.
What is serialIfClock?
Sets where the serial line's clock signal comes from: auto(1) derives it from the connector setting (external clock if DTE, internally generated if DCE), extern(2) forces the clock to be supplied by the external device, and intern(3) forces this device to generate and provide the clock itself on the output pins.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.25.1.1.5 snmpwalk -v2c -c public <target> BIANCA-BRICK-SERIAL-MIB::serialIfClock
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.25.1.1.5.1 snmpget -v2c -c public <target> BIANCA-BRICK-SERIAL-MIB::serialIfClock.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.25.1.1.5.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-SERIAL-MIB::serialIfClock OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.25 | serial | BIANCA-BRICK-SERIAL-MIB |
| 1.3.6.1.4.1.272.4.25.1 | serialIfTable | BIANCA-BRICK-SERIAL-MIB |
| 1.3.6.1.4.1.272.4.25.1.1 | serialIfEntry | BIANCA-BRICK-SERIAL-MIB |
| 1.3.6.1.4.1.272.4.25.1.1.5 | serialIfClock | BIANCA-BRICK-SERIAL-MIB |