All MIBs › BIANCA-BRICK-PPP-MIB › pppExtIfBodMode
pppExtIfBodMode
Module: BIANCA-BRICK-PPP-MIB
OID (symbolic): BIANCA-BRICK-PPP-MIB::pppExtIfBodMode
OID (numeric): 1.3.6.1.4.1.272.4.3.9.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables bandwidth on demand (BOD) mode for leased line and dialup interfaces when setting to bod-active (3) respectively bod-passive (4) or backup only mode for leased line connections like X.21. When set to disabled (1), neither bandwidth on demand (as specified by the pppExtIfTable) or backup mode is enabled. Four modes (bap-active (5), bap-passive (6), bap-both(7) and bap-first (8)) are available for BAP (Bandwidth Allocation Protocol) support to specify wether BAP Call-Requests and BAP Callback-Requests should be initiated and/or accepted.
What is pppExtIfBodMode?
This read-write object configures bandwidth-on-demand (BOD) or backup behavior for a PPP interface: bod-active/bod-passive add or drop extra B-channels based on load, backup enables standby-only mode for leased lines, and the bap-* values select which side (local, peer, or both) can initiate Bandwidth Allocation Protocol requests; disabled turns all of this off, and delete removes the entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.3.9.1.2 snmpwalk -v2c -c public <target> BIANCA-BRICK-PPP-MIB::pppExtIfBodMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.3.9.1.2.1 snmpget -v2c -c public <target> BIANCA-BRICK-PPP-MIB::pppExtIfBodMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.3.9.1.2.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-PPP-MIB::pppExtIfBodMode OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.3 | ppp | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4.3.9 | pppExtIfTable | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4.3.9.1 | pppExtIfEntry | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4.3.9.1.2 | pppExtIfBodMode | BIANCA-BRICK-PPP-MIB |