All MIBs › BIANCA-BRICK-PPP-MIB › biboPPPLayer2Mode
biboPPPLayer2Mode
Module: BIANCA-BRICK-PPP-MIB
OID (symbolic): BIANCA-BRICK-PPP-MIB::biboPPPLayer2Mode
OID (numeric): 1.3.6.1.4.1.272.4.3.1.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object specifies the layer 2 mode to be used for a connection. It is only relevant, if the Encapsulation involves an LAPB protocol. This is the case for x25, x25-ppp, ip-lapb, lapb, x31-bchan, x75-ppp, x75btx-ppp, x25-nosig. The Default value of this object is auto. For dialup connection, the layer 2 mode will than be DTE, on the calling side and DCE on the called side. For permanent connections, the layer 2 mode is set at lower layers (for example isdnChType in the isdnChTable).
When this object is set to dte or dce, the layer 2 mode will always be DTE or DCE, regardless of the call direction or the settings at the lower layer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.3.1.1.22 snmpwalk -v2c -c public <target> BIANCA-BRICK-PPP-MIB::biboPPPLayer2Mode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.3.1.1.22.1 snmpget -v2c -c public <target> BIANCA-BRICK-PPP-MIB::biboPPPLayer2Mode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.3.1.1.22.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4.3 | ppp | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4.3.1 | biboPPPTable | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4.3.1.1 | biboPPPEntry | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1.272.4.3.1.1.22 | biboPPPLayer2Mode | BIANCA-BRICK-PPP-MIB |