All MIBs › BIANCA-BRICK-PMX-MIB › pmxIfLayer1Framing
pmxIfLayer1Framing
Module: BIANCA-BRICK-PMX-MIB
OID (symbolic): BIANCA-BRICK-PMX-MIB::pmxIfLayer1Framing
OID (numeric): 1.3.6.1.4.1.272.4.12.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: In T1 and E1 mode the primary rate interface can work with totaly different framing types on layer 1. The framing type must match the configuration of the first connected point e.g. the exchange or the NT
e1(1) E1 - minimum mode, CCITT Recommendation G.704 (Table 4a) e1-crc(2) E1 , crc mode, CCITT Recommendation G.704 (Table 4b) e1-mf(3) E1 , CCITT Recommendation G.704 (Table 4a) with Timeslot 16 multiframing enabled e1-mf-crc(4) E1 , CCITT Recommendation G.704 (Table 4b) with Timeslot 16 multiframing enabled t1-esf(5) T1 , Extended SuperFrame mode DS1 t1-d4(6) T1 , AT&T D4 format DS1
t1-framings can only be set when pmxIfLayer1Mode is t1 e1-framings can only be set when pmxIfLayer1Mode is e1 The default framing for t1 is t1-esf, the default framing for e1 is e1-crc
Modifications of the default values are usualy not required. Exceptions are only known for sweden and france (use e1)
What is pmxIfLayer1Framing?
In T1 and E1 mode the primary rate interface can work with totaly different framing types on layer 1. The pmxIfLayer1Framing specifies the E1/T1 frame structure (basic, CRC, multiframe), which must align with the network provider's configuration. For example, typical values range from 1 to 10 depending on configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.12.1.1.5 snmpwalk -v2c -c public <target> BIANCA-BRICK-PMX-MIB::pmxIfLayer1Framing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.12.1.1.5.1 snmpget -v2c -c public <target> BIANCA-BRICK-PMX-MIB::pmxIfLayer1Framing.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.12.1.1.5.1 i <value>
Start monitoring bintec elmeg BIANCA/BRICK ISDN routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-PMX-MIB::pmxIfLayer1Framing OID value, configure state conditions and alerts, and monitor any bintec elmeg BIANCA/BRICK ISDN routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.12 | pmx | BIANCA-BRICK-PMX-MIB |
| 1.3.6.1.4.1.272.4.12.1 | pmxIfTable | BIANCA-BRICK-PMX-MIB |
| 1.3.6.1.4.1.272.4.12.1.1 | pmxIfEntry | BIANCA-BRICK-PMX-MIB |
| 1.3.6.1.4.1.272.4.12.1.1.5 | pmxIfLayer1Framing | BIANCA-BRICK-PMX-MIB |