BIANCA-BRICK-IPSEC-MIB :: ipsecGlobIkePort

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBIANCA-BRICK-IPSEC-MIBipsecGlobIkePort

ipsecGlobIkePort

Module: BIANCA-BRICK-IPSEC-MIB

OID (symbolic): BIANCA-BRICK-IPSEC-MIB::ipsecGlobIkePort

OID (numeric): 1.3.6.1.4.1.272.4.26.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the port the IKE key management service listens to.

What is ipsecGlobIkePort?

This OID specifies the UDP port (typically 500) that the IKE key exchange service listens on. Non-standard ports can be used to hide IPsec from network scanning. Example: setting to 500 is the standard IKE port; some deployments use 4500 to traverse NAT.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.26.1.20
snmpwalk -v2c -c public <target> BIANCA-BRICK-IPSEC-MIB::ipsecGlobIkePort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.26.1.20.1
snmpget -v2c -c public <target> BIANCA-BRICK-IPSEC-MIB::ipsecGlobIkePort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.26.1.20.1 i <value>

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-IPSEC-MIB::ipsecGlobIkePort OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.272bintecBIANCA-BOX-ISDN-MIB
1.3.6.1.4.1.272.4biboBIANCA-BOX-ISDN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.272.4.26ipsecBIANCA-BRICK-IPSEC-MIB
1.3.6.1.4.1.272.4.26.1ipsecGlobalsBIANCA-BRICK-IPSEC-MIB
1.3.6.1.4.1.272.4.26.1.20ipsecGlobIkePortBIANCA-BRICK-IPSEC-MIB