All MIBs › BIANCA-BRICK-IP-MIB › ipNatPrIntPort
ipNatPrIntPort
Module: BIANCA-BRICK-IP-MIB
OID (symbolic): BIANCA-BRICK-IP-MIB::ipNatPrIntPort
OID (numeric): 1.3.6.1.4.1.272.4.5.6.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the internal target hosts port-number for incoming calls matching the table entry. If this object is set to -1, the target portnumber will be taken from the original incoming calls setup packet. No translation of the portnumber will take place in this case. If the set of portnumbers for this table entry is a range instead of a single portnumber, this object will specify the base of the target range of portnumbers. The internal portnumber will be constructed as follows:
new-target-port := old-target-port - ipNatPrExtPort + ipNatPrIntPort
What is ipNatPrIntPort?
This writable port number designates the internal (private) destination port for NAT translation of incoming calls to this rule. The value can be a specific port or -1 to preserve the original incoming port. Setting ipNatPrIntPort to 8080 means incoming calls matching this rule route to internal port 8080 regardless of their external destination port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.5.6.1.10 snmpwalk -v2c -c public <target> BIANCA-BRICK-IP-MIB::ipNatPrIntPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.5.6.1.10.1 snmpget -v2c -c public <target> BIANCA-BRICK-IP-MIB::ipNatPrIntPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.5.6.1.10.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-IP-MIB::ipNatPrIntPort OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.5 | biboip | BIANCA-BRICK-IP-MIB |
| 1.3.6.1.4.1.272.4.5.6 | ipNatPresetTable | BIANCA-BRICK-IP-MIB |
| 1.3.6.1.4.1.272.4.5.6.1 | ipNatPresetEntry | BIANCA-BRICK-IP-MIB |
| 1.3.6.1.4.1.272.4.5.6.1.10 | ipNatPrIntPort | BIANCA-BRICK-IP-MIB |