All MIBs › BIANCA-BRICK-IP-MIB › ipNatOutRemotePortRange
ipNatOutRemotePortRange
Module: BIANCA-BRICK-IP-MIB
OID (symbolic): BIANCA-BRICK-IP-MIB::ipNatOutRemotePortRange
OID (numeric): 1.3.6.1.4.1.272.4.5.18.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies together with ipNatOutRemotePort the range of portnumbers for outgoing calls, for which the table entry shall be valid. If both objects are set to -1, the entry is valid for all portnumbers. If ipNatOutPortRange is set to -1, the entry is only valid, when the portnumber of an outgoing call is equal to ipNatOutRemotePort. Otherwise, the entry is valid, if the called portnumber lies in the range RemotePort .. RemotePortRange.
What is ipNatOutRemotePortRange?
This OID specifies the remote port number (or lower bound of a port range) for outgoing NAT sessions that the rule applies to. Network admins use this to match traffic based on the destination port when configuring network address translation rules. Example: setting this to 443 means the NAT rule applies only to outgoing HTTPS traffic; setting to -1 matches all remote ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.5.18.1.7 snmpwalk -v2c -c public <target> BIANCA-BRICK-IP-MIB::ipNatOutRemotePortRange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.5.18.1.7.1 snmpget -v2c -c public <target> BIANCA-BRICK-IP-MIB::ipNatOutRemotePortRange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.5.18.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ipNatOutRemotePortRange.1
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-IP-MIB::ipNatOutRemotePortRange OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.5 | biboip | BIANCA-BRICK-IP-MIB |
| 1.3.6.1.4.1.272.4.5.18 | ipNatOutTable | BIANCA-BRICK-IP-MIB |
| 1.3.6.1.4.1.272.4.5.18.1 | ipNatOutEntry | BIANCA-BRICK-IP-MIB |
| 1.3.6.1.4.1.272.4.5.18.1.7 | ipNatOutRemotePortRange | BIANCA-BRICK-IP-MIB |