BIANCA-BRICK-IP-MIB :: ipNatOutProtocol

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBIANCA-BRICK-IP-MIBipNatOutProtocol

ipNatOutProtocol

Module: BIANCA-BRICK-IP-MIB

OID (symbolic): BIANCA-BRICK-IP-MIB::ipNatOutProtocol

OID (numeric): 1.3.6.1.4.1.272.4.5.18.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the protocol, for which the table entry shall be valid.

What is ipNatOutProtocol?

This object specifies the protocol, for which the table entry shall be valid. The specific value of ipNatOutProtocol affects read-write behavior. Refer to device documentation for configuration guidance.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.5.18.1.2
snmpwalk -v2c -c public <target> BIANCA-BRICK-IP-MIB::ipNatOutProtocol

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.5.18.1.2.1
snmpget -v2c -c public <target> BIANCA-BRICK-IP-MIB::ipNatOutProtocol.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.5.18.1.2.1 i <value>

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-IP-MIB::ipNatOutProtocol OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.272bintecBIANCA-BOX-ISDN-MIB
1.3.6.1.4.1.272.4biboBIANCA-BOX-ISDN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.272.4.5biboipBIANCA-BRICK-IP-MIB
1.3.6.1.4.1.272.4.5.18ipNatOutTableBIANCA-BRICK-IP-MIB
1.3.6.1.4.1.272.4.5.18.1ipNatOutEntryBIANCA-BRICK-IP-MIB
1.3.6.1.4.1.272.4.5.18.1.2ipNatOutProtocolBIANCA-BRICK-IP-MIB