BIANCA-BRICK-DHCP-MIB :: ipDhcpIfIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BIANCA-BRICK-DHCP-MIB › ipDhcpIfIndex

ipDhcpIfIndex

Module: BIANCA-BRICK-DHCP-MIB

OID (symbolic): BIANCA-BRICK-DHCP-MIB::ipDhcpIfIndex

OID (numeric): 1.3.6.1.4.1.272.4.5.8.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Index of interface where this range of IP addresses will be assigned to DHCP clients

What is ipDhcpIfIndex?

Index of interface where this range of IP addresses This numeric index points to the specific ATM or network interface this virtual circuit uses. For example, ifIndex=5 points to the fifth network interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.5.8.1.1
snmpwalk -v2c -c public <target> BIANCA-BRICK-DHCP-MIB::ipDhcpIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.5.8.1.1.1
snmpget -v2c -c public <target> BIANCA-BRICK-DHCP-MIB::ipDhcpIfIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.5.8.1.1.1 i <value>

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-DHCP-MIB::ipDhcpIfIndex OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.272bintecBIANCA-BOX-ISDN-MIB
1.3.6.1.4.1.272.4biboBIANCA-BOX-ISDN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.272.4.5biboipBIANCA-BRICK-DHCP-MIB
1.3.6.1.4.1.272.4.5.8ipDhcpTableBIANCA-BRICK-DHCP-MIB
1.3.6.1.4.1.272.4.5.8.1ipDhcpEntryBIANCA-BRICK-DHCP-MIB
1.3.6.1.4.1.272.4.5.8.1.1ipDhcpIfIndexBIANCA-BRICK-DHCP-MIB