All MIBs › BGP4-MIB › bgpPeerHoldTimeConfigured
bgpPeerHoldTimeConfigured
Module: BGP4-MIB
OID (symbolic): BGP4-MIB::bgpPeerHoldTimeConfigured
OID (numeric): 1.3.6.1.2.1.15.3.1.20
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
Time interval (in seconds) for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0). If it is zero (0), the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.15.3.1.20 snmpwalk -v2c -c public <target> BGP4-MIB::bgpPeerHoldTimeConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.15.3.1.20.1 snmpget -v2c -c public <target> BGP4-MIB::bgpPeerHoldTimeConfigured.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.15.3.1.20.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.15 | bgp | BGP-MIB |
| 1.3.6.1.2.1.15.3 | bgpPeerTable | BGP4-MIB |
| 1.3.6.1.2.1.15.3.1 | bgpPeerEntry | BGP4-MIB |
| 1.3.6.1.2.1.15.3.1.20 | bgpPeerHoldTimeConfigured | BGP4-MIB |