BEGEMOT-BRIDGE-MIB :: begemotBridgeStpPortOperPointToPoint

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBEGEMOT-BRIDGE-MIBbegemotBridgeStpPortOperPointToPoint

begemotBridgeStpPortOperPointToPoint

Module: BEGEMOT-BRIDGE-MIB

OID (symbolic): BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortOperPointToPoint

OID (numeric): 1.3.6.1.4.1.12325.1.205.2.3.1.5

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection. If adminPointToPointMAC is set to auto(2), then the value of operPointToPointMAC is determined in accordance with the specific procedures defined for the MAC entity concerned, as defined in IEEE 802.1w, clause 6.5. The value is determined dynamically; that is, it is re-evaluated whenever the value of adminPointToPointMAC changes, and whenever the specific procedures defined for the MAC entity evaluates a change in its point-to-point status.

What is begemotBridgeStpPortOperPointToPoint?

Reports whether this bridge port is currently considered to have a point-to-point connection to its attached LAN segment. When the administrative setting is auto, this reflects the value determined by the bridge based on the port's detected duplex mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12325.1.205.2.3.1.5
snmpwalk -v2c -c public <target> BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortOperPointToPoint

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12325.1.205.2.3.1.5.1
snmpget -v2c -c public <target> BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortOperPointToPoint.1

Start monitoring FreeBSD-based bridges/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortOperPointToPoint OID value, configure state conditions and alerts, and monitor any FreeBSD-based bridges/switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12325fokusFOKUS-MIB
1.3.6.1.4.1.12325.1begemotBEGEMOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12325.1.205begemotBridgeBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2begemotBridgeStpBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2.3begemotBridgeStpExtPortTableBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2.3.1begemotBridgeStpExtPortEntryBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2.3.1.5begemotBridgeStpPortOperPointToPointBEGEMOT-BRIDGE-MIB