BEGEMOT-BRIDGE-MIB :: begemotBridgeStpPortAdminEdgePort

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBEGEMOT-BRIDGE-MIBbegemotBridgeStpPortAdminEdgePort

begemotBridgeStpPortAdminEdgePort

Module: BEGEMOT-BRIDGE-MIB

OID (symbolic): BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortAdminEdgePort

OID (numeric): 1.3.6.1.4.1.12325.1.205.2.3.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. Setting this object will also cause the corresponding instance of begemotBridgeStpPortOperEdgePort to change to the same value. Note that even when this object's value is true, the value of the corresponding instance of begemotBridgeStpPortOperEdgePort can be false if a BPDU has been received.

The value of this object MUST be retained across reinitializations of the management system.

What is begemotBridgeStpPortAdminEdgePort?

Configures whether this bridge port is administratively treated as an edge port — a port connected directly to an end device rather than another bridge. Setting it to true allows the port to transition immediately to forwarding without waiting for STP convergence.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12325.1.205.2.3.1.2
snmpwalk -v2c -c public <target> BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortAdminEdgePort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12325.1.205.2.3.1.2.1
snmpget -v2c -c public <target> BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortAdminEdgePort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12325.1.205.2.3.1.2.1 s <value>

Start monitoring FreeBSD-based bridges/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BEGEMOT-BRIDGE-MIB::begemotBridgeStpPortAdminEdgePort OID value, configure state conditions and alerts, and monitor any FreeBSD-based bridges/switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12325fokusFOKUS-MIB
1.3.6.1.4.1.12325.1begemotBEGEMOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12325.1.205begemotBridgeBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2begemotBridgeStpBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2.3begemotBridgeStpExtPortTableBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2.3.1begemotBridgeStpExtPortEntryBEGEMOT-BRIDGE-MIB
1.3.6.1.4.1.12325.1.205.2.3.1.2begemotBridgeStpPortAdminEdgePortBEGEMOT-BRIDGE-MIB