All MIBs › BDCOM-IF-THRESHOLD-MIB › bdifthThresholdFiredNotifyEnable
bdifthThresholdFiredNotifyEnable
Module: BDCOM-IF-THRESHOLD-MIB
OID (symbolic): BDCOM-IF-THRESHOLD-MIB::bdifthThresholdFiredNotifyEnable
OID (numeric): 1.3.6.1.4.1.3320.9.218.1.3.1
Node type: OBJECT-TYPE
Type: BdifthThresholdSeverityOrZero
Access: read-write
Description: This object specifies the minimum severity threshold governing the generation of bdifthIfThresholdFired and bdifthIfThresholdCleared notifications. For example, if the value of this object is set to 'degrade', then the agent generates these notifications if and only if the severity of the threshold being exceeded is 'degrade' or 'fail'. When the value is other than '0', the generation of bdifthTemplateIfStatusChange notifications is also enabled. The value of '0' disables the generation of all notifications. By default, the value of this object is set to '0'.
What is bdifthThresholdFiredNotifyEnable?
Sets the minimum severity level that a threshold must reach before the device sends a threshold-fired or threshold-cleared SNMP notification. Only thresholds at or above this severity level will generate trap notifications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.9.218.1.3.1 snmpwalk -v2c -c public <target> BDCOM-IF-THRESHOLD-MIB::bdifthThresholdFiredNotifyEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.9.218.1.3.1.1 snmpget -v2c -c public <target> BDCOM-IF-THRESHOLD-MIB::bdifthThresholdFiredNotifyEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3320.9.218.1.3.1.1 s <value>
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-IF-THRESHOLD-MIB::bdifthThresholdFiredNotifyEnable OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.9 | bdMgmt | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.9.218 | bdcomIfThresholdMIB | BDCOM-IF-THRESHOLD-MIB |
| 1.3.6.1.4.1.3320.9.218.1 | bdIfThresholdMIBObjects | BDCOM-IF-THRESHOLD-MIB |
| 1.3.6.1.4.1.3320.9.218.1.3 | bdifthIfThresholdFiredGroup | BDCOM-IF-THRESHOLD-MIB |
| 1.3.6.1.4.1.3320.9.218.1.3.1 | bdifthThresholdFiredNotifyEnable | BDCOM-IF-THRESHOLD-MIB |