ATT-CNM-ENHANCED-FRAME-RELAY-MIB :: attCNMefrPollVerifyTimer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsATT-CNM-ENHANCED-FRAME-RELAY-MIBattCNMefrPollVerifyTimer

attCNMefrPollVerifyTimer

Module: ATT-CNM-ENHANCED-FRAME-RELAY-MIB

OID (symbolic): ATT-CNM-ENHANCED-FRAME-RELAY-MIB::attCNMefrPollVerifyTimer

OID (numeric): 1.3.6.1.4.1.74.2.15.8.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This variable specifies the maximum number of seconds the Frame Relay interface allows between the receipt of Status Enquiries. The expiration of this timer is considered to be an errored event.

This timer is referred to as T392 in the ANSI standard.

This variable is applicable only if this interface is configured to be the receiver of PVC management polls. Refer to the attCNMefrPollDirection object to verify this.

What is attCNMefrPollVerifyTimer?

A read-only setting (ANSI's T392) giving the maximum seconds this interface waits between received Status Enquiries before treating the gap as an errored event; it only applies when this interface is configured as a receiver of PVC management polls per attCNMefrPollDirection.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.74.2.15.8.1.1.8
snmpwalk -v2c -c public <target> ATT-CNM-ENHANCED-FRAME-RELAY-MIB::attCNMefrPollVerifyTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.74.2.15.8.1.1.8.1
snmpget -v2c -c public <target> ATT-CNM-ENHANCED-FRAME-RELAY-MIB::attCNMefrPollVerifyTimer.1

Start monitoring AT&T Customer Network Management (CNM) Frame Relay service equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATT-CNM-ENHANCED-FRAME-RELAY-MIB::attCNMefrPollVerifyTimer OID value, configure state conditions and alerts, and monitor any AT&T Customer Network Management (CNM) Frame Relay service equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.74att_2ATT-CNM-ENHANCED-FRAME-RELAY-MIB
1.3.6.1.4.1.74.2att_mgmtATT-CNM-ENHANCED-FRAME-RELAY-MIB
1.3.6.1.4.1.74.2.15att_cnmATT-CNM-ENHANCED-FRAME-RELAY-MIB
1.3.6.1.4.1.74.2.15.8att_cnm_efrATT-CNM-ENHANCED-FRAME-RELAY-MIB
1.3.6.1.4.1.74.2.15.8.1attCNMefrConfigTableATT-CNM-ENHANCED-FRAME-RELAY-MIB
1.3.6.1.4.1.74.2.15.8.1.1attCNMefrConfigEntryATT-CNM-ENHANCED-FRAME-RELAY-MIB
1.3.6.1.4.1.74.2.15.8.1.1.8attCNMefrPollVerifyTimerATT-CNM-ENHANCED-FRAME-RELAY-MIB