All MIBs › ATMSWCH-MIB › atmSwchSlotRoutePort
atmSwchSlotRoutePort
Module: ATMSWCH-MIB
OID (symbolic): ATMSWCH-MIB::atmSwchSlotRoutePort
OID (numeric): 1.3.6.1.4.1.81.33.8.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Identifier for the port on the above slot to be used by the route
What is atmSwchSlotRoutePort?
This is a read-write integer specifying which port on the target slot carries the routed traffic. Combined with slot number, it fully identifies the routing destination. Setting to 2 routes traffic to port 2 on the specified slot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.33.8.1.1.7 snmpwalk -v2c -c public <target> ATMSWCH-MIB::atmSwchSlotRoutePort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.33.8.1.1.7.1 snmpget -v2c -c public <target> ATMSWCH-MIB::atmSwchSlotRoutePort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.33.8.1.1.7.1 i <value>
Start monitoring Lucent Technologies ATM switch platforms (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATMSWCH-MIB::atmSwchSlotRoutePort OID value, configure state conditions and alerts, and monitor any Lucent Technologies ATM switch platforms (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.33 | atmSwch | ATMSWCH-MIB |
| 1.3.6.1.4.1.81.33.8 | atmSwchSlotRoute | ATMSWCH-MIB |
| 1.3.6.1.4.1.81.33.8.1 | atmSwchSlotRouteTable | ATMSWCH-MIB |
| 1.3.6.1.4.1.81.33.8.1.1 | atmSwchSlotRouteEntry | ATMSWCH-MIB |
| 1.3.6.1.4.1.81.33.8.1.1.7 | atmSwchSlotRoutePort | ATMSWCH-MIB |