All MIBs › ATM-RMON-MIB › atmMatrixTopNControlGrantedSize
atmMatrixTopNControlGrantedSize
Module: ATM-RMON-MIB
OID (symbolic): ATM-RMON-MIB::atmMatrixTopNControlGrantedSize
OID (numeric): 1.3.6.1.4.1.9.10.16.1.4.4.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The maximum number of host entries in this report.
When the associated atmMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe must not lower this value except as a result of a set to the associated atmMatrixTopNControlRequestedSize object.
For example, if the value of atmMatrixTopNControlRateBase is equal to atmMatrixTopNCells(1), when the next topN report is generated, host entries with the highest value of atmMatrixSDCells shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. Each atmMatrixSDCells value is copied to the associated atmMatrixTopNRate object.
It is an implementation-specific matter how entries with the same value are sorted. It is also an implementation- specific matter as to whether or not zero-valued entries are available.
What is atmMatrixTopNControlGrantedSize?
Reports the actual maximum number of ATM conversation entries the probe will include in this Top N matrix report, which may be less than the requested size if probe resources are constrained.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.16.1.4.4.1.8 snmpwalk -v2c -c public <target> ATM-RMON-MIB::atmMatrixTopNControlGrantedSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.16.1.4.4.1.8.1 snmpget -v2c -c public <target> ATM-RMON-MIB::atmMatrixTopNControlGrantedSize.1
Start monitoring ATM network probes/monitoring devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-RMON-MIB::atmMatrixTopNControlGrantedSize OID value, configure state conditions and alerts, and monitor any ATM network probes/monitoring devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.16 | atmRmon | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1 | atmRmonMIBObjects | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4 | atmMatrix | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4.4 | atmMatrixTopNControlTable | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4.4.1 | atmMatrixTopNControlEntry | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4.4.1.8 | atmMatrixTopNControlGrantedSize | ATM-RMON-MIB |