All MIBs › ATM-RMON-MIB › atmMatrixControlInserts
atmMatrixControlInserts
Module: ATM-RMON-MIB
OID (symbolic): ATM-RMON-MIB::atmMatrixControlInserts
OID (numeric): 1.3.6.1.4.1.9.10.16.1.4.1.1.1
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of times an atmMatrix entry has been inserted into the atmMatrix table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the atmMatrixSDTable and atmMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other).
To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting atmMatrixControlDeletes from atmMatrixControlInserts, and dividing the result by two.
What is atmMatrixControlInserts?
Counts the total number of times an ATM conversation-pair entry has been inserted into the ATM matrix table, incrementing by two if the same pair is deleted and reinserted (once for each direction table).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.16.1.4.1.1.1 snmpwalk -v2c -c public <target> ATM-RMON-MIB::atmMatrixControlInserts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.16.1.4.1.1.1.1 snmpget -v2c -c public <target> ATM-RMON-MIB::atmMatrixControlInserts.1
Start monitoring ATM network probes/monitoring devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-RMON-MIB::atmMatrixControlInserts OID value, configure state conditions and alerts, and monitor any ATM network probes/monitoring devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.16 | atmRmon | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1 | atmRmonMIBObjects | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4 | atmMatrix | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4.1 | atmMatrixControlTable | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4.1.1 | atmMatrixControlEntry | ATM-RMON-MIB |
| 1.3.6.1.4.1.9.10.16.1.4.1.1.1 | atmMatrixControlInserts | ATM-RMON-MIB |