Description: The table whose entries describe the policies configured.

Each policy contains two possible policy operators: 'require' and 'must avoid'. The require policy operator can be applied with an Ne-NSC list, an Rp-NSC list or both. The must avoid policy operator can be applied with only an Ne-NSc list.

In order to create a new policy, the policyRowStatus should be set to createAndWait. The status should not be set to active until the remaining objects of the entry have been specified.

If an existing entry is to be modified, then the RowStatus should be set to notInService, the objects modified, and then the RowStatus set to active.

If the RowStatus is set to indicate that the entry is to become active (CreateAndGo or Active), then the following rules are checked: 1) At least one of requireNeNscOperator or requireRpNscOperator or mustAvoidNeNscOperator must be specified. 2) If the requireNeNscOperator is specified, then at least one Ne-NSC value must exist in an active row of the policyNeNscTable for this policyIndex and an policyOperator of require. 3) If the requireRpNscOperator is specified, then at least one Rp-NSC value must exist in an active row of the policyRpNscTable for this policyIndex. 4) If the mustAvoidNeNscOperator is specified, then at least one Ne-NSC value must exist in an active row of the policyNeNscTable for this policyIndex and an policyOperator of mustAvoid. If a row is deleted from this table, then the corresponding rows of the policyNeNscTable and policyRpNscTable are also deleted. In addition, any entries in the policyConstraintTable that reference this policyIndex are removed.