All MIBs › AT-SYSINFO-MIB › fanAndPsRpsMonitoringStatus
fanAndPsRpsMonitoringStatus
Module: AT-SYSINFO-MIB
OID (symbolic): AT-SYSINFO-MIB::fanAndPsRpsMonitoringStatus
OID (numeric): 1.3.6.1.4.1.207.8.4.4.3.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The current status of redundant power supply monitoring. The monitoring of the redundant power supply and its fan must be enabled by command or by setting this variable to on. The value notSupported means that this device does not support redundant power supplies. Only the values on or off may be written to this variable. If this variables reads as notSupported, an attempt to write to this variable will result in a bad value error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.3.1.4 snmpwalk -v2c -c public <target> AT-SYSINFO-MIB::fanAndPsRpsMonitoringStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.3.1.4.1 snmpget -v2c -c public <target> AT-SYSINFO-MIB::fanAndPsRpsMonitoringStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.4.4.3.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.207 | alliedTelesis | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.3 | sysinfo | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.3.1 | fanAndPs | AT-SYSINFO-MIB |
| 1.3.6.1.4.1.207.8.4.4.3.1.4 | fanAndPsRpsMonitoringStatus | AT-SYSINFO-MIB |