All MIBs › AT-SETUP-MIB › runCnfgSaveAs
runCnfgSaveAs
Module: AT-SETUP-MIB
OID (symbolic): AT-SETUP-MIB::runCnfgSaveAs
OID (numeric): 1.3.6.1.4.1.207.8.4.4.4.500.3.1.1
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Set with a URL to save the running configuration to the flash or card filesystem using that filename (e.g. 'flash:/myconfig.cfg' or 'card:/myconfig.cfg').
Only one set operation can be executed at a time across all SNMP users, and an operation may not be started unless the current value of runCnfgSaveAsStatus is 'idle'. The URL must not contain whitespace characters.
Immediately upon setting this object, the system will attempt to save the running configuration, and the process will continue on the device until it has completed or a failure occurs. The current status of the operation can be determined by reading runCnfgSaveAsStatus, and the result of the last completed operation is indicated by runCnfgLastSaveResult.
When read, this object will return the URL of the last configuration save operation that was attempted.
What is runCnfgSaveAs?
This read-write text saves the current running configuration to a named file. Setting triggers immediate config backup. Setting to "flash:/config-backup.cfg" saves config.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.500.3.1.1 snmpwalk -v2c -c public <target> AT-SETUP-MIB::runCnfgSaveAs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.500.3.1.1.1 snmpget -v2c -c public <target> AT-SETUP-MIB::runCnfgSaveAs.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.4.4.4.500.3.1.1.1 s <value>
Start monitoring Allied Telesis managed switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-SETUP-MIB::runCnfgSaveAs OID value, configure state conditions and alerts, and monitor any Allied Telesis managed switches and routers from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.4 | modules | AT-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.500 | setup | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.3 | deviceConfiguration | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.1 | runningConfig | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.1.1 | runCnfgSaveAs | AT-SETUP-MIB |