All MIBs › AT-SETUP-MIB › currSoftSaveToFile
currSoftSaveToFile
Module: AT-SETUP-MIB
OID (symbolic): AT-SETUP-MIB::currSoftSaveToFile
OID (numeric): 1.3.6.1.4.1.207.8.4.4.4.500.2.1.4
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Set with a URL (e.g. 'flash:/filename.rel' or 'card:/filename.rel') to save the currently running software to the root of flash or SD card. Only one save operation can be executed at a time across all SNMP users, and an operation may not be started unless the current value of currSoftSaveStatus is 'idle'. The URL must not contain whitespace characters.
Immediately upon executing the set action, the actual firmware save operation will be started and continue on the device until it has completed or a failure occurs. The current status of the operation can be determined by reading currSoftSaveStatus, and the result of the last completed operation is indicated by currSoftLastSaveResult.
When read, this object will return the URL of the last firmware save operation that was attempted.
What is currSoftSaveToFile?
This read-write text saves running firmware to a URL path (flash or SD card). Setting triggers immediate save to specified location. Setting "flash:/backup.rel" saves to flash.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.500.2.1.4 snmpwalk -v2c -c public <target> AT-SETUP-MIB::currSoftSaveToFile
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.500.2.1.4.1 snmpget -v2c -c public <target> AT-SETUP-MIB::currSoftSaveToFile.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.4.4.4.500.2.1.4.1 s <value>
Start monitoring Allied Telesis managed switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-SETUP-MIB::currSoftSaveToFile OID value, configure state conditions and alerts, and monitor any Allied Telesis managed switches and routers from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.4 | modules | AT-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.500 | setup | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.2 | firmware | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1 | currentFirmware | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.4 | currSoftSaveToFile | AT-SETUP-MIB |