All MIBs › AT-SETUP-MIB › currSoftSaveStatus
currSoftSaveStatus
Module: AT-SETUP-MIB
OID (symbolic): AT-SETUP-MIB::currSoftSaveStatus
OID (numeric): 1.3.6.1.4.1.207.8.4.4.4.500.2.1.5
Node type: OBJECT-TYPE
Type: SystemFileOperationType
Access: read-only
Description: Returns the status of any current operation to store the running software to a release file. The following values may be returned:
1 (idle) There is no release file save operation in progress.
2 (success) The last release file save operation completed successfully.
3 (failure) The last release file save operation failed.
4 (saving) A release file save operation is currently in progress.
When a read of this object returns a value of 'success' or 'failure', it will immediately be reset to 'idle' and a new operation may be initiated if desired. A detailed description of the last completed operation may be determined by reading currSoftLastSaveResult.
What is currSoftSaveStatus?
This read-only enumeration shows the status of firmware save operations. idle(1) means no save running; success(2) completed; failure(3) failed. A value of success(2) means save completed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.500.2.1.5 snmpwalk -v2c -c public <target> AT-SETUP-MIB::currSoftSaveStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.500.2.1.5.1 snmpget -v2c -c public <target> AT-SETUP-MIB::currSoftSaveStatus.1
Start monitoring Allied Telesis managed switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-SETUP-MIB::currSoftSaveStatus OID value, configure state conditions and alerts, and monitor any Allied Telesis managed switches and routers from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.4 | modules | AT-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.500 | setup | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.2 | firmware | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1 | currentFirmware | AT-SETUP-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.5 | currSoftSaveStatus | AT-SETUP-MIB |