All MIBs › AT-QOSv2-MIB › atQosv2VlanId
atQosv2VlanId
Module: AT-QOSv2-MIB
OID (symbolic): AT-QOSv2-MIB::atQosv2VlanId
OID (numeric): 1.3.6.1.4.1.207.8.4.4.4.503.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The VLAN ID of the interface where the storm is detected on.
What is atQosv2VlanId?
This read-only integer identifies which VLAN experienced a traffic storm event on the specified interface. Narrows down the broadcast domain. Value 100 means the storm was on VLAN 100.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.503.1.2 snmpwalk -v2c -c public <target> AT-QOSv2-MIB::atQosv2VlanId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.503.1.2.1 snmpget -v2c -c public <target> AT-QOSv2-MIB::atQosv2VlanId.1
Start monitoring Allied Telesis AlliedWare Plus switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-QOSv2-MIB::atQosv2VlanId OID value, configure state conditions and alerts, and monitor any Allied Telesis AlliedWare Plus switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.4 | modules | AT-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.503 | atQosv2 | AT-QOSv2-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.503.1 | atQosv2NotificationVariables | AT-QOSv2-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.503.1.2 | atQosv2VlanId | AT-QOSv2-MIB |