All MIBs › AT-ISDN-MIB › ccDetailsInSetupCliSearchList
ccDetailsInSetupCliSearchList
Module: AT-ISDN-MIB
OID (symbolic): AT-ISDN-MIB::ccDetailsInSetupCliSearchList
OID (numeric): 1.3.6.1.4.1.207.8.4.4.4.37.1.1.28
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If the ccDetailsInSetupCliSearch object is set to 'list', this object gives the index of the CLI list to search. The value of CLI list indices is 1..100. The value 0 is returned when the ccDetailsInSetupCliSearch object is not set to 'list'. If the value of this object is set to 0 via SNMP, then the ccDetailsInSetupCliSearch object will be internally set to 'off'. Subsequently setting the value of this object to a non-zero value will set the ccDetailsInSetupCliSearch object to 'list'. Note that when using the command line interface, CLI list indices range from 0 to 99, but when using SNMP they range from 1 to 100. This is because SNMP will not allow a table index to have the value 0, and the command line usage of indices from 0 to 99 is too well established to change.
What is ccDetailsInSetupCliSearchList?
When ccDetailsInSetupCliSearch is set to 'list' mode, this object identifies (by index 1-100) the specific CLI list that will be searched to find a match for an incoming call's calling number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.37.1.1.28 snmpwalk -v2c -c public <target> AT-ISDN-MIB::ccDetailsInSetupCliSearchList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.37.1.1.28.1 snmpget -v2c -c public <target> AT-ISDN-MIB::ccDetailsInSetupCliSearchList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.4.4.4.37.1.1.28.1 i <value>
Start monitoring Allied Telesis managed switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-ISDN-MIB::ccDetailsInSetupCliSearchList OID value, configure state conditions and alerts, and monitor any Allied Telesis managed switches and routers from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.4 | modules | AT-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.37 | cc | AT-ISDN-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.37.1 | ccDetailsTable | AT-ISDN-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1 | ccDetailsEntry | AT-ISDN-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.28 | ccDetailsInSetupCliSearchList | AT-ISDN-MIB |