All MIBs › AT-FILEv2-MIB › atFilev2FileViewerStackId
atFilev2FileViewerStackId
Module: AT-FILEv2-MIB
OID (symbolic): AT-FILEv2-MIB::atFilev2FileViewerStackId
OID (numeric): 1.3.6.1.4.1.207.8.4.4.4.600.7.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The stack ID of the stack member for which files will be displayed in the FileViewer table. For devices that are not capable of being stacked, this variable will always read as 1, and will cause an error on being written to with any value other than 1.
Write this variable with the stack ID of the stack member for which a view of files is required. If the stack member doesn't exist, an error will be returned. For a chassis switch, it corresponds to the card ID.
Note that the other variables specifying the files to view will not be altered by changing the stack ID, which means that the file view table could be empty if a non-existant device or path has been referenced previously.
What is atFilev2FileViewerStackId?
This read-write integer specifies which stack member's file system to browse. An administrator sets this to 2 to view files on stack member 2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.600.7.1 snmpwalk -v2c -c public <target> AT-FILEv2-MIB::atFilev2FileViewerStackId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.4.600.7.1.1 snmpget -v2c -c public <target> AT-FILEv2-MIB::atFilev2FileViewerStackId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.4.4.4.600.7.1.1 i <value>
Start monitoring Allied Telesis managed switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-FILEv2-MIB::atFilev2FileViewerStackId OID value, configure state conditions and alerts, and monitor any Allied Telesis managed switches and routers from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.4 | modules | AT-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.600 | atFilev2 | AT-FILEv2-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.600.7 | atFilev2FileViewer | AT-FILEv2-MIB |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.1 | atFilev2FileViewerStackId | AT-FILEv2-MIB |