All MIBs › ASKEY-SYSTEM-MIB › oamF5Vci
oamF5Vci
Module: ASKEY-SYSTEM-MIB
OID (symbolic): ASKEY-SYSTEM-MIB::oamF5Vci
OID (numeric): 1.3.6.1.4.1.3646.1300.2.1.15.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.
What is oamF5Vci?
This object specifies the Virtual Channel Identifier (VCI) value for an ATM F5 OAM (Operations, Administration, and Maintenance) loopback cell used in diagnostic tests. Operators set this value to identify which virtual circuit to use when performing end-to-end or segment-level OAM loopback tests on ATM connections. The value must not exceed the maximum VCI bits supported by the ATM interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3646.1300.2.1.15.1.3 snmpwalk -v2c -c public <target> ASKEY-SYSTEM-MIB::oamF5Vci
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3646.1300.2.1.15.1.3.1 snmpget -v2c -c public <target> ASKEY-SYSTEM-MIB::oamF5Vci.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3646.1300.2.1.15.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.3646 | askey | ASKEY-DSLAM-MIB |
| 1.3.6.1.4.1.3646.1300 | asd300 | ASKEY-DSLAM-MIB |
| 1.3.6.1.4.1.3646.1300.2 | ipDslam | ASKEY-DSLAM-MIB |
| 1.3.6.1.4.1.3646.1300.2.1 | askeySystemMib | ASKEY-SYSTEM-MIB |
| 1.3.6.1.4.1.3646.1300.2.1.15 | askeyDslamOam | ASKEY-SYSTEM-MIB |
| 1.3.6.1.4.1.3646.1300.2.1.15.1 | oamF5 | ASKEY-SYSTEM-MIB |
| 1.3.6.1.4.1.3646.1300.2.1.15.1.3 | oamF5Vci | ASKEY-SYSTEM-MIB |