All MIBs › APS-MIB › apsConfigSfBerThreshold
apsConfigSfBerThreshold
Module: APS-MIB
OID (symbolic): APS-MIB::apsConfigSfBerThreshold
OID (numeric): 1.3.6.1.2.1.10.49.1.1.2.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: The Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5.
This object may be modified if the associated apsConfigRowStatus object is equal to active(1).
What is apsConfigSfBerThreshold?
Sets the Signal Failure bit error rate threshold as a negative power of 10, above which the signal is declared a failure and triggers an APS protection switch. This threshold is typically set higher (worse BER) than the Signal Degrade threshold to indicate a more severe fault condition.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.49 | apsMIB | APS-MIB |
| 1.3.6.1.2.1.10.49.1 | apsMIBObjects | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1 | apsConfig | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1.2 | apsConfigTable | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1.2.1 | apsConfigEntry | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1.2.1.8 | apsConfigSfBerThreshold | APS-MIB |