All MIBs › APS-MIB › apsConfigSdBerThreshold
apsConfigSdBerThreshold
Module: APS-MIB
OID (symbolic): APS-MIB::apsConfigSdBerThreshold
OID (numeric): 1.3.6.1.2.1.10.49.1.1.2.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: The Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5.
This object may be modified if the associated apsConfigRowStatus object is equal to active(1).
What is apsConfigSdBerThreshold?
Sets the Signal Degrade bit error rate threshold as a negative power of 10 (e.g., a value of 5 means a BER threshold of 10^-5), above which the signal is considered degraded and may trigger a protection switch. This threshold allows operators to tune sensitivity for degraded-signal detection.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.49 | apsMIB | APS-MIB |
| 1.3.6.1.2.1.10.49.1 | apsMIBObjects | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1 | apsConfig | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1.2 | apsConfigTable | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1.2.1 | apsConfigEntry | APS-MIB |
| 1.3.6.1.2.1.10.49.1.1.2.1.7 | apsConfigSdBerThreshold | APS-MIB |