All MIBs › APS-MIB › apsCommandSwitch
apsCommandSwitch
Module: APS-MIB
OID (symbolic): APS-MIB::apsCommandSwitch
OID (numeric): 1.3.6.1.2.1.10.49.1.5.1.1
Node type: OBJECT-TYPE
Type: ApsSwitchCommand
Access: read-write
Description: Allows the initiation of an APS switch command on the APS group and channel specified by the index values.
When read this object returns the last command written or noCmd if no command has been written to this channel since initialization. The return of the last command written does not imply that this command is currently in effect. This request may have been preempted by a higher priority local or remote request. In order to determine the current state of the APS group it is necessary to read the objects apsStatusK1K2Rcv and apsStatusK1K2Trans.
The value lockoutOfProtection should only be applied to the protection line channel since that switch command prevents any of the working channels from switching to the protection line. Following the same logic, forcedSwitchProtectToWork and manualSwitchProtectToWork should only be applied to the protection line channel.
forcedSwitchWorkToProtect and manualSwitchWorkToProtect should only be applied to a working channel.
What is apsCommandSwitch?
Allows an operator to manually initiate an APS protection switch command (such as forced switch or manual switch) on a specific channel within an APS group, and also returns the last command that was issued.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.49.1.5.1.1 snmpwalk -v2c -c public <target> APS-MIB::apsCommandSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.49.1.5.1.1.1 snmpget -v2c -c public <target> APS-MIB::apsCommandSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.49.1.5.1.1.1 s <value>
Start monitoring SONET/SDH optical transport equipment (linear APS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APS-MIB::apsCommandSwitch OID value, configure state conditions and alerts, and monitor any SONET/SDH optical transport equipment (linear APS) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.49 | apsMIB | APS-MIB |
| 1.3.6.1.2.1.10.49.1 | apsMIBObjects | APS-MIB |
| 1.3.6.1.2.1.10.49.1.5 | apsCommandTable | APS-MIB |
| 1.3.6.1.2.1.10.49.1.5.1 | apsCommandEntry | APS-MIB |
| 1.3.6.1.2.1.10.49.1.5.1.1 | apsCommandSwitch | APS-MIB |