All MIBs › APS-MIB-JUNI › junidApsConfigSfBerThreshold
junidApsConfigSfBerThreshold
Module: APS-MIB-JUNI
OID (symbolic): APS-MIB-JUNI::junidApsConfigSfBerThreshold
OID (numeric): 1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: The Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5.
This object may be modified if the associated junidApsConfigRowStatus object is equal to active(1).
What is junidApsConfigSfBerThreshold?
This read-create integer (3-5) sets Signal Failure BER threshold as 10^-N. Network engineers configure this for failure detection. A value of 3 means 10^-3 BER (very poor signal).
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.3 | juniperUniExperiment | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.3.2 | juniExperiment | Juniper-Experiment |
| 1.3.6.1.4.1.4874.3.2.2 | juniSonetApsExperiment | Juniper-Experiment |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.3.2.2.1 | junidApsMIB | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1 | junidApsMIBObjects | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1.1 | junidApsConfig | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1.1.2 | junidApsConfigTable | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1 | junidApsConfigEntry | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.8 | junidApsConfigSfBerThreshold | APS-MIB-JUNI |