APS-MIB-JUNI :: junidApsConfigRevert

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › APS-MIB-JUNI › junidApsConfigRevert

junidApsConfigRevert

Module: APS-MIB-JUNI

OID (symbolic): APS-MIB-JUNI::junidApsConfigRevert

OID (numeric): 1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-create

Description: The revertive mode of the APS group.

nonrevertive

Traffic remains on the protection line until another switch request is received.

revertive

When the condition that caused a switch to the protection line has been cleared the signal is switched back to the working line. Since switching is revertive with the 1:n architecture, junidApsConfigRevert must be set to revertive if junidApsConfigMode is set to oneToN.

Switching may optionally be revertive with the 1+1 architecture.

This object may not be modified if the associated junidApsConfigRowStatus object is equal to active(1).

What is junidApsConfigRevert?

This read-create enumeration sets revertive mode (nonrevertive/revertive). Network engineers configure this to control failback behavior. 'revertive' returns traffic to working line after fault clears.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.3juniperUniExperimentJuniper-UNI-SMI
1.3.6.1.4.1.4874.3.2juniExperimentJuniper-Experiment
1.3.6.1.4.1.4874.3.2.2juniSonetApsExperimentJuniper-Experiment
Numeric OIDNameModule
1.3.6.1.4.1.4874.3.2.2.1junidApsMIBAPS-MIB-JUNI
1.3.6.1.4.1.4874.3.2.2.1.1junidApsMIBObjectsAPS-MIB-JUNI
1.3.6.1.4.1.4874.3.2.2.1.1.1junidApsConfigAPS-MIB-JUNI
1.3.6.1.4.1.4874.3.2.2.1.1.1.2junidApsConfigTableAPS-MIB-JUNI
1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1junidApsConfigEntryAPS-MIB-JUNI
1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.4junidApsConfigRevertAPS-MIB-JUNI