All MIBs › APS-MIB-JUNI › junidApsCommandSwitch
junidApsCommandSwitch
Module: APS-MIB-JUNI
OID (symbolic): APS-MIB-JUNI::junidApsCommandSwitch
OID (numeric): 1.3.6.1.4.1.4874.3.2.2.1.1.5.1.1
Node type: OBJECT-TYPE
Type: JunidApsSwitchCommand
Access: read-write
Description: Allows the initiation of an APS switch command on the APS group and channel specified by the index values.
If the APS switch command cannot be executed because an equal or higer priority request is in effect, an error is returned.
When read this object returns the last command written or noCmd if no command has been written to this channel since initialization. The return of the last command written does not imply that this command is currently in effect. This request may have been preempted by a higher priority local or remote request. In order to determine the current state of the APS group it is necessary to read the objects junidApsStatusK1K2Rcv and junidApsStatusK1K2Trans.
The value lockoutOfProtection should only be applied to the protection line channel since that switch command prevents any of the working channels from switching to the protection line. Following the same logic, forcedSwitchProtectToWork and manualSwitchProtectToWork should only be applied to the protection line channel.
forcedSwitchWorkToProtect and manualSwitchWorkToProtect should only be applied to a working channel.
What is junidApsCommandSwitch?
This read-write JunidApsSwitchCommand initiates manual APS switches. Network engineers use this to force channel switching for testing/maintenance. Returns the last command issued.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.3.2.2.1.1.5.1.1 snmpwalk -v2c -c public <target> APS-MIB-JUNI::junidApsCommandSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.3.2.2.1.1.5.1.1.1 snmpget -v2c -c public <target> APS-MIB-JUNI::junidApsCommandSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.3.2.2.1.1.5.1.1.1 s <value>
Start monitoring Juniper Networks SONET-interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APS-MIB-JUNI::junidApsCommandSwitch OID value, configure state conditions and alerts, and monitor any Juniper Networks SONET-interface routers from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.3 | juniperUniExperiment | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.3.2 | juniExperiment | Juniper-Experiment |
| 1.3.6.1.4.1.4874.3.2.2 | juniSonetApsExperiment | Juniper-Experiment |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.3.2.2.1 | junidApsMIB | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1 | junidApsMIBObjects | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1.5 | junidApsCommandTable | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1.5.1 | junidApsCommandEntry | APS-MIB-JUNI |
| 1.3.6.1.4.1.4874.3.2.2.1.1.5.1.1 | junidApsCommandSwitch | APS-MIB-JUNI |