All MIBs › APNL-MODULAR-PDU-MIB › nodePeakCurrent
nodePeakCurrent
Module: APNL-MODULAR-PDU-MIB
OID (symbolic): APNL-MODULAR-PDU-MIB::nodePeakCurrent
OID (numeric): 1.3.6.1.4.1.29640.4.3.33.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The measured max current since last reset of the node (in 1/10th Amperes).
What is nodePeakCurrent?
Reports the maximum current draw recorded on the PDU node since the last reset, measured in tenths of an Ampere. This helps administrators identify peak load events for capacity planning and fault analysis.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.29640.4.3.33.1.7 snmpwalk -v2c -c public <target> APNL-MODULAR-PDU-MIB::nodePeakCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.29640.4.3.33.1.7.1 snmpget -v2c -c public <target> APNL-MODULAR-PDU-MIB::nodePeakCurrent.1
Start monitoring APC (Schneider Electric) modular Power Distribution Units (PDU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APNL-MODULAR-PDU-MIB::nodePeakCurrent OID value, configure state conditions and alerts, and monitor any APC (Schneider Electric) modular Power Distribution Units (PDU) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.29640 | apNederland | APNL-MODULAR-PDU-MIB |
| 1.3.6.1.4.1.29640.4 | apnlModules | APNL-MODULAR-PDU-MIB |
| 1.3.6.1.4.1.29640.4.3 | pdu | APNL-MODULAR-PDU-MIB |
| 1.3.6.1.4.1.29640.4.3.33 | nodeTable | APNL-MODULAR-PDU-MIB |
| 1.3.6.1.4.1.29640.4.3.33.1 | nodeEntry | APNL-MODULAR-PDU-MIB |
| 1.3.6.1.4.1.29640.4.3.33.1.7 | nodePeakCurrent | APNL-MODULAR-PDU-MIB |