All MIBs › ANNEX-MIB › anxpSlipAllowCompression
anxpSlipAllowCompression
Module: ANNEX-MIB
OID (symbolic): ANNEX-MIB::anxpSlipAllowCompression
OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.57
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
When enabled, the Annex will use TCP/IP header compression on this SLIP link only if the other end of the SLIP link initiates the compression.
What is anxpSlipAllowCompression?
When enabled, the device accepts compression requests from the remote end of the SLIP link. Allows negotiation. Example: enabled permits remote-initiated compression.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.57 snmpwalk -v2c -c public <target> ANNEX-MIB::anxpSlipAllowCompression
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.57.1 snmpget -v2c -c public <target> ANNEX-MIB::anxpSlipAllowCompression.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.57.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> anxpSlipAllowCompression.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3 | ports | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7 | portTable | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1 | portEntry | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1.57 | anxpSlipAllowCompression | ANNEX-MIB |