All MIBs › ANNEX-MIB › anxpPppSecurityProto
anxpPppSecurityProto
Module: ANNEX-MIB
OID (symbolic): ANNEX-MIB::anxpPppSecurityProto
OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.63
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Defines which security protocol will be used to authenticate the remote user. This parameter must be set and the Annex enable_security (anxEnableSecurity) must be enabled before authentication is performed. The default is none
What is anxpPppSecurityProto?
Authentication protocol for PPP connections: PAP (plaintext) or none. Controls peer identity verification. Example: pap requires username/password exchange.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.63 snmpwalk -v2c -c public <target> ANNEX-MIB::anxpPppSecurityProto
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.63.1 snmpget -v2c -c public <target> ANNEX-MIB::anxpPppSecurityProto.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.63.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> anxpPppSecurityProto.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3 | ports | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7 | portTable | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1 | portEntry | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1.63 | anxpPppSecurityProto | ANNEX-MIB |