ANNEX-MIB :: anxpCliInactivity

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsANNEX-MIBanxpCliInactivity

anxpCliInactivity

Module: ANNEX-MIB

OID (symbolic): ANNEX-MIB::anxpCliInactivity

OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.23

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The amount of time, in minutes, that the Annex waits before hanging up the serial port after it becomes idle. A value of 0 turns off the timer. A value of 255 means immediate, which causes the Annex to hang up the port immediately after exiting from the last job.

What is anxpCliInactivity?

Minutes before the device hangs up an idle serial port at CLI. Forces port reset if user is inactive. Example: 10 minutes drops connection and resets port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.23
snmpwalk -v2c -c public <target> ANNEX-MIB::anxpCliInactivity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.23.1
snmpget -v2c -c public <target> ANNEX-MIB::anxpCliInactivity.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.23.1 i <value>

Start monitoring Bay Networks/Xylogics terminal/remote-access servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ANNEX-MIB::anxpCliInactivity OID value, configure state conditions and alerts, and monitor any Bay Networks/Xylogics terminal/remote-access servers from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.15xylogicsANNEX-MIB
1.3.6.1.4.1.15.2annexANNEX-MIB
1.3.6.1.4.1.15.2.3portsANNEX-MIB
1.3.6.1.4.1.15.2.3.7portTableANNEX-MIB
1.3.6.1.4.1.15.2.3.7.1portEntryANNEX-MIB
1.3.6.1.4.1.15.2.3.7.1.23anxpCliInactivityANNEX-MIB