All MIBs › ANNEX-MIB › anxcBoot
anxcBoot
Module: ANNEX-MIB
OID (symbolic): ANNEX-MIB::anxcBoot
OID (numeric): 1.3.6.1.4.1.15.2.6.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The type of boot to be performed. To initiate a dump, this parameter needs to be set by the management station. The values stored in anxcBootImage, anxcBootTime, and anxcBootMsg are used as needed, depending on the boot type.
What is anxcBoot?
Boot action to perform: immediate, delayed, dump, diagnostic, abort schedule, or quiet. Triggers device reboot operations. Example: immediate reboots the device now.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.6.1 snmpwalk -v2c -c public <target> ANNEX-MIB::anxcBoot
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.6.1.1 snmpget -v2c -c public <target> ANNEX-MIB::anxcBoot.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.6.1.1 i <value>
Start monitoring Bay Networks/Xylogics terminal/remote-access servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ANNEX-MIB::anxcBoot OID value, configure state conditions and alerts, and monitor any Bay Networks/Xylogics terminal/remote-access servers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.6 | annexcmds | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.6.1 | anxcBoot | ANNEX-MIB |