All MIBs › ANNEX-MIB › anxSysLogPort
anxSysLogPort
Module: ANNEX-MIB
OID (symbolic): ANNEX-MIB::anxSysLogPort
OID (numeric): 1.3.6.1.4.1.15.2.5.54
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Specifies the Annex port number where syslog messages are sent. If set to 0, syslog messages are not sent to an Annex port. This is independent of any host-based syslogging that may be enabled. The maximum port number allowed will depend on the highest numbered port on the specific Annex.
What is anxSysLogPort?
Serial port number (0=disabled, 1-16) where syslog messages are also sent. Enables local logging. Example: 4 sends syslog to serial port 4.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.5.54 snmpwalk -v2c -c public <target> ANNEX-MIB::anxSysLogPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.5.54.1 snmpget -v2c -c public <target> ANNEX-MIB::anxSysLogPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.5.54.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.5 | annexconfig | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.5.54 | anxSysLogPort | ANNEX-MIB |