AIMOS :: aimosGSMNSOV1SignalStrengthHysteresis

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAIMOSaimosGSMNSOV1SignalStrengthHysteresis

aimosGSMNSOV1SignalStrengthHysteresis

Module: AIMOS

OID (symbolic): AIMOS::aimosGSMNSOV1SignalStrengthHysteresis

OID (numeric): 1.3.6.1.4.1.6408.201.3.5.16.1.8

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Signal strength modifications within the hysteresis do not cause the NSO to send data with new signal strength values. E.g., a hysteresis of +/- 1 dB ignores signal strength modifications within a range of 2 dB. If actually the signal strength is 20, you will recognize signal strength modification if the value gets lower than 19 or higher than 21.

What is aimosGSMNSOV1SignalStrengthHysteresis?

This read-write field (0 to 50) sets a dead-band, in dB, around the last-reported GSM signal strength so that small fluctuations don't trigger a fresh update. For example, with a hysteresis of 1 dB and a current reading of 20, the NSO only reports a change once the signal drops below 19 or rises above 21.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6408.201.3.5.16.1.8
snmpwalk -v2c -c public <target> AIMOS::aimosGSMNSOV1SignalStrengthHysteresis

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6408.201.3.5.16.1.8.1
snmpget -v2c -c public <target> AIMOS::aimosGSMNSOV1SignalStrengthHysteresis.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6408.201.3.5.16.1.8.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> aimosGSMNSOV1SignalStrengthHysteresis.1

Start monitoring Andrew Wireless Systems DAS/repeater equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIMOS::aimosGSMNSOV1SignalStrengthHysteresis OID value, configure state conditions and alerts, and monitor any Andrew Wireless Systems DAS/repeater equipment from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6408mikomAIMOS
1.3.6.1.4.1.6408.201aimosAIMOS
1.3.6.1.4.1.6408.201.3aimosObjectsAIMOS
1.3.6.1.4.1.6408.201.3.5aimosUnitManagementAIMOS
1.3.6.1.4.1.6408.201.3.5.16aimosGSMNSOV1TableAIMOS
1.3.6.1.4.1.6408.201.3.5.16.1aimosGSMNSOV1EntryAIMOS
1.3.6.1.4.1.6408.201.3.5.16.1.8aimosGSMNSOV1SignalStrengthHysteresisAIMOS