All MIBs › ADVANTECH-EKI-PRONEER-MIB › dot3InPauseFrames
dot3InPauseFrames
Module: ADVANTECH-EKI-PRONEER-MIB
OID (symbolic): ADVANTECH-EKI-PRONEER-MIB::dot3InPauseFrames
OID (numeric): 1.3.6.1.4.1.10297.202.7000.1.3.1.1.25
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation.
This counter does not increment when the interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCInPauseFrames object for 10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
What is dot3InPauseFrames?
This read-only counter increments when MAC PAUSE (flow control) frames are received. Normal on full-duplex links under congestion; should be zero on half-duplex links.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10297.202.7000.1.3.1.1.25 snmpwalk -v2c -c public <target> ADVANTECH-EKI-PRONEER-MIB::dot3InPauseFrames
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10297.202.7000.1.3.1.1.25.1 snmpget -v2c -c public <target> ADVANTECH-EKI-PRONEER-MIB::dot3InPauseFrames.1
Start monitoring Advantech EKI-series industrial Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADVANTECH-EKI-PRONEER-MIB::dot3InPauseFrames OID value, configure state conditions and alerts, and monitor any Advantech EKI-series industrial Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10297 | advantech | ADVANTECH-EKI-PRONEER-MIB |
| 1.3.6.1.4.1.10297.202 | aSwitchMIB | ADVANTECH-EKI-PRONEER-MIB |
| 1.3.6.1.4.1.10297.202.7000 | proneer | ADVANTECH-EKI-PRONEER-MIB |
| 1.3.6.1.4.1.10297.202.7000.1 | monitoring | ADVANTECH-EKI-PRONEER-MIB |
| 1.3.6.1.4.1.10297.202.7000.1.3 | portMonitoring | ADVANTECH-EKI-PRONEER-MIB |
| 1.3.6.1.4.1.10297.202.7000.1.3.1 | portStatisticTable | ADVANTECH-EKI-PRONEER-MIB |
| 1.3.6.1.4.1.10297.202.7000.1.3.1.1 | portStatisticEntry | ADVANTECH-EKI-PRONEER-MIB |
| 1.3.6.1.4.1.10297.202.7000.1.3.1.1.25 | dot3InPauseFrames | ADVANTECH-EKI-PRONEER-MIB |