All MIBs › ADVA-FSPR7-MIB › scMonitoredDuplexMode
scMonitoredDuplexMode
Module: ADVA-FSPR7-MIB
OID (symbolic): ADVA-FSPR7-MIB::scMonitoredDuplexMode
OID (numeric): 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.34
Node type: OBJECT-TYPE
Type: EthDuplexMode
Access: read-only
Description:
Monitored Duplex Mode. Available if AUTONEG=ENABLE
What is scMonitoredDuplexMode?
This read-only object reports the negotiated duplex mode (half or full) of a service component port after auto-negotiation is enabled. It reflects the actual operational duplex setting detected on the interface. An operator would check this value to diagnose communication issues or confirm that duplex negotiation succeeded as expected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.34 snmpwalk -v2c -c public <target> ADVA-FSPR7-MIB::scMonitoredDuplexMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.34.1 snmpget -v2c -c public <target> ADVA-FSPR7-MIB::scMonitoredDuplexMode.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.11 | fspR7 | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.11.7 | advaFspR7 | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3 | management | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5 | dcnMgmt | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5.3 | scTable | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5.3.1 | scEntry | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.34 | scMonitoredDuplexMode | ADVA-FSPR7-MIB |